Scott U-Marq Autograver engraving machines

All-in-One Performance — U-Marq engineers asked the question: "With so many high quality engraving machines on the market today, what could we do to ensure a bench-top engraver with a competitive edge?" Their answer: "Don‘t just assemble a machine… build a high productivity system."

They‘ve designed our hardware, software and electronics in unison — harmonized to work as one. Most systems on the market today are a combination of hardware from one supplier, software from a second and electronics from a third. The pieces of these multi-vendor "assemblies" always seem to have a few cracks between them, and productivity inevitably falls through them. So check out the U-Marq hardware, then review the software and electronics. And see how real common sense leads to uncommon results.

To receive our comprehensive specifications in pdf format, ready to print, please Download Prices & Specifications.

HARDWARE SPECIFICATIONS
Performance Specifications
Engraving area	10.4" x 8.0" (265 x 205 mm)
Z axis travel	2.63” (67 mm)
Z axis clearance	3" (75 mm) from bottom of spindle to bed, 2" to top of vise jaws
Feed rates	Maximum X & Y axis feedrate: 5.24 in/sec (133 mm/sec)
Spindle speed	14,000 rpm fixed
Vise options	Optional vise with 8.5" (215 mm) opening; optional 6" wide jaws with 16 holes; optional rubber-coated pins to hold irregularly shaped objects
General and Environmental Specifications
Dimensions	18” x 17.25” x 14.625” (460 x 440 x 372 mm) with integrated controller
Weight	43 lbs (19.5 kg)shipped complete in one box
Shipping Weight	58 lbs (26.3 kg)
Construction	Stainless steel spindle, lead screws and precision linear rails, steel chassis
Spindle motor	42W DC motor, 3.0 A at 117 V, 1.6 A at 230 V
Noise level	No-load operation: 75 dB (A) or less; Standby: 45 dB (A) or less (According to ISO 7779)
Environment	Temperature: 41 to 104°F (5 to 40°C) humidity: 35 to 80 % (no condensation)
Computer Specifications
PC Interface	Serial (Serial-to-USB adapter included)B
Software	Included with each machine, with one security dongle, 32 bit Windows or 64 bit Vista software, 100 Engraving fonts, international symbols and miscellaneous graphics
Minimum PC	PC with Pentium 4 2GHz processor, 256Mb RAM, 100Mb Hard Disk, Mouse, SVGA Monitor running at 265 color, Windows 2000, XP or XP64 with Service Pack 2
Suggested PC	PC with Pentium 4 3GHz processor, 1Gb RAM, 100Mb Hard Disk, Mouse, SVGA Monitor running at 24bit color, Windows 2000, XP or XP64 with Service Pack 2

To receive our comprehensive specifications in pdf format, ready to print, please Download Prices & Specifications.